2010 Honda VFR1200F | Doin' Time

Photography by Joe Neric

Wrist: Marty Estes  
Msrp (2010): $15,999
Miles: 7123
Mpg: 36
Mods: Akrapovic slip-on, K&N oil and air filters, Continental tires, Helibars clip-ons

I've logged 3,500 miles since my last update, and I’m happy to report that a fair number of those were purely for entertainment. Every year when MotoGP comes to California I join up with a group of friends and take the long, scenic route from Los Angeles to Monterey. Prior to the annual pilgrimage I asked Motorcyclist wrench jockey Michael Candreia to perform an oil change and tire swap so the Honda would be ready for the outing. Michael installed a K&N oil filter ($13.99; www.knfilters.com) and filled the crankcase with Maxima Premium4 oil ($7.97 per liter; www.maximausa.com). The stock Dunlop Roadsmarts were cooked at 4000 miles, so fresh Continental Road Attack 2 tires ($155.00 front, $210.00 rear; www.conti-online.com) were spooned on as well. The Conti’s are advertised as a sport-touring tire, but the European definition of sport touring entails much more sport than touring. The grip and handling of the RA2s is a step above the stock rubber, but lifespan probably won’t be as good—especially after the route we took to and from Monterey! The twists and turns of Highway 33, 58 and the legendary Pacific Coast Highway put a hurt on the Road Attacks, and with 3200 miles on them the rear is starting to look worn. At least it’s worn evenly from edge to edge…

The VFR’s exotic engine configuration is much more apparent now thanks to an exhaust upgrade. Akrapovic’s high-mount titanium slip-on ($974.95; www.akrapovic.com) sounds fantastic and cut 6.1 pounds from the Viffer’s backside. In conjunction with a high-flow K&N air filter ($62.50), the freer-flowing muffler added 7.4 peak horsepower as verified by our SuperFlow dynamometer. In the open configuration, the Slovenian-made pipe produces a very unique sound without being obnoxious. With the noise-reducing insert in place the pipe still nets 5.7 bhp, with much less noise. After installing the exhaust I initially had issues with the accessory center stand dragging at full lean. Removing the rubber bumper from the stand let it rest higher, eliminating the ground clearance issue.

The trip to Monterey was properly sporty, but for around town and longer, straighter routes I find the VFR’s stock ergos a little too aggressive. Helibars has been making alternative handlebars for decades, and a set of their hi-rise clip-ons for the VFR ($289.00; www.helibars.com) move the grips 2 inches up and 1 inch back with less of a downward angle. The VFR was apparently a difficult bike to engineer, as there is a very limited amount of clearance between the gas tank and windscreen at full lock. Kudos to Heli Modified for making the bars fit, and for providing excellent instructions with their product. After installing the bars the riding position is still sporty but far more comfortable than the stock setup. With less reach to the bars I can sit farther back on the seat, which has made life easier for my back, neck and shoulders.

Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!

*Please enter your username

*Please enter your password

*Please enter your comments
Comments:
Not Registered?Signup Here
(1024 character limit)
Deauville_2010
Does the Akrapovic muffler have the EPA stamp, making it legal for street use in the US?
Motorcyclist
  • Motorcyclist Online