Brock's Performance BMW S 1000 RR Dragbike Breaks the 8-Second Barrier

DAYTON, Ohio. (July 2, 2010)-- Ongoing research and development has pushed the Brock's Performance SuperSport-prepped, stock-wheelbase BMW S 1000 RR into the coveted 8-second E.T. bracket.

During the recent "No Hatin'" race series at Kil-Kare Raceway in Xenia, Ohio, the bike recorded a scorching 8.95 run with Jeremy Teasley in the saddle.

Stressing that it's "business as usual" at Brock's Performance while the AMA Dragbike series undergoes restructuring, shop owner Brock Davidson vowed not to let turbulent times deter him from developing products and testing them in the sport's most competitive regional venues.

For Kil-Kare, the BMW was run in AMA Dragbike SuperSport trim. SuperSport rules are the most stringent in motorcycle drag racing. The only allowable deviations from stock are lowered suspension, modified gearing, aftermarket exhaust, a fuel-injection controller, ceramic wheel bearings and very few other changes.

"We're working hard to improve the BMW's performance," said Davidson. "To do any kind of systematic testing you must have a standard to run against. The SuperSport rule structure is still the way stock-wheelbase performance is gauged."

To extract every bit of acceleration from the bike, Brock's enlisted the services of local drag ace Jeremy Teasley to lay down clean runs on the short, low, lean, 200-horsepower machine. With two AMA Dragbike Real Street championships under his belt, Teasley is widely regarded as one of the best sportbike drag racers in the business.

Running off an 8.90 national record set by Rickey Gadson on a Brock's-prepared ZX-14 last season, Teasley clicked off successive quarter-mile runs of 9.12 and 9.04 seconds before hitting a 8.971 at 157.93 mph. He went on to lower the mark with an astounding 8.950. Teasley's best 1/8-mile time of 5.83 seconds was just over one-hundredth of a second off Gadson's national record. All this, at a track that was not prepared to national-event standards, with an adjusted air density altitude of 3800 feet.

"With the S 1000 RR having a better power-to-weight ratio of any production sportbike, we felt strongly that we were going to do some damage in the SuperSport class with the BMW this season and it is very disappointing that AMA Dragbike suspended operations after we got only two races in," said Davidson. "Nonetheless, we're going to continue doing what we do best: developing, testing and selling products that make streetbikes fly. I still hold out hope that there will be another national-level SuperSport class in the somewhat near future. When that happens, we'll show up with a finely tuned, powerful weapon, ready to do battle."

For more information on championship-winning Brock's Performance exhaust systems, BST wheels and other go-fast parts, visit

About Brock's Performance
Home of six current AMA Dragbike World Records and countless national titles, Brock's Performance leads the way in sportbike innovation for acceleration addicts. From exhaust systems to wheels, this championship-winning company designs, builds and sells more than 1000 products that make it easier and safer for racers and street riders to reach record-breaking results through a never-ending process of research, development and track testing. For more information, go to

About BST
Based near Johannesburg, South Africa, BST engineers and manufactures the world's finest carbon fiber motorcycle components--from wheels and frames to fuel tanks and fenders--to the highest international standards. On the world stage, BST wheels have been proven at every level of FIM Grand Prix roadracing competition and have won 12 national championships. For more information about BST wheels, visit

About PutterPowerMedia
_PutterPowerMedia is a full-service media relations, editorial, advertising and photography agency serving the powersports industry. For more information on products and services, log on to _