IT MADE its first appearance at the New York Auto show, this brand spanking new Harley-Davidson. It appeared along with the rest of the knee actions. And, these cinder trackers are the original knee action “wheels.” If you don’t think so just watch the boys in action.
Those who have the urge to bend a few broadsides (even those who haven’t) will smell castor in this new speedway motor.
All-American, the Harley-Davidson is the first factory built machine for the new sport on this side of the tariff wall. It was designed “from the buttons up,” not made over. From all indications it will travel with the best of ‘em.
If I am a judge this new equipment will go a long way to help put over night speedway racing in America. When old John Public gets a load of the circus the new cinder machines will provide we will be on our way toward enjoying motorcycling at its best-just like Europe. Before long we’ll hear much about these night speedways. Power to them. And speaking of power these new Milwaukee mades are teeming with it.
The illustrations show what the machine looks like. To really appreciate them you must actually see them, sit on one, or ride it. When you feel one of this new breed you just naturally want your picture taken with it-no foolin.’
The new racer was tried out in California. She went West and took curves that Mae West never heard of. Hank Syvertsen took a brace of them out to Los Angeles where the night speedways are in full bloom. The boys played with those jobs plenty. The little motors asked no favors, just a chance to meet the pack in the field. All the boys rode ‘em. First one; then another. The same rider would then ride against the machines on another brand. No matter what the combination the test machines held their own against all comers. That is the kind of a test that counts-and it was the kind of a test that brought praise from all the boys who were on hand to put the new Harley-Davidson speedway machines through their paces.
Heretofore, if you wanted a racer-well, you just wanted it. Now your Harley-Davidson dealer will handle this job just the same as stock equipment. In other words, he can get you one no matter who you are or where you are. May the best rider win.
Speaking of horsepower-these 30.50 jobs put it out. Not the catalog kind, you understand, but the good old fashioned hay and oats kind-the kind that pulls on the tugs. And windup! There’s up to 6000 revs tucked away in every one of those power houses. That’s revs. How long does the piston stop at top center before it changes its mind? Ha! -just like the Cuban government, a hundred revolutions per second.
There are big doors for the gas and fire so to speak, the inlet valve being 1 ¾ in diameter and the exhaust 1 5/8. Just imagine how these traps flop at 6000 revs-like old fashioned Congressmen.
Flywheels are roller bearinged on both sides. The piston push is quite considerable with a ratio of 14.5 to 1. The crank pin can take it, being 1 1/8 in diameter.
Enclosed push rods clean up the job and make for more satisfactory and permanent adjustment. Rocker arms work in roller bearings. Guides have alemite fittings. As you will note from the photographs the motor design is held down to strict simplicity. A clean little crate.
Of interest to those who have already been racing is the fact that the Harley-Davidson motor can be fitted into the J.A.P. racing frame. This offers an opportunity for Harley-Davidson powerizing of present equipment.
A special Linkert racing carburetor with a specially designed Harley-Davidson air cleaner (to keep the clinkers out) mixes the TNT. A fuel pot and cleaner that will mix up the air and gas like the gold dollar situation-and that is mixed.