2008 Husqvarna CR 125

Motorcyclist Online helps you research the used 2008 Husqvarna CR 125 before buying this Motocross bike. The 2008 CR 125 is made in Italy. With front Hydraulic Disc brakes that will securely stop this CR125 motorcycle on demand. It comes standard ...     read more
Selectbike
click to expand
Bg Badge

2008 Husqvarna CR 125

Model Overview:

2008 CR 125

Bodystyle Motocross
Warranty 1 months
Manufacturer Country Italy
Introduction Year N/A
Displacement (cc) 124.8
Engine Type Single-Cylinder
Nextstep Bg

2008 Husqvarna CR 125

Intro

The 2008 Husqvarna CR 150 is a cross-range dirt bike offered by the Swedish manufacturer. Now a subsidiary of BMW, Husqvarna has had a strong presence in Enduro and Motocross championships, especially with their small, two-stroke, 125cc bikes. Since they entered the market in 1988, their models have become technical benchmarks for other motocross and enduro bike manufacturers. For 2008, the CR 150 gets a number of minor and major technical changes based on what the company learned during the European motocross championships. One big technical change made this year is the newly designed chassis. Most of its modifications are under the cradle, providing a more streamlined design and also increased ground clearance from last year. The engine mounting is also very different, with new cylinder heads and reinforced. The air filter has changed too, with a new design that makes It more water resistant.

The wave-type disc brakes and polished hubs are also new to the 2008 Husqvarna CR. The exhaust on the engine has a new muffler and the clutch has the same housing used on higher-end TC and TE 250 models. This makes the clutch a lot more efficient and robust. The bike also gets some changes in terms of looks. The liveries are redesigned to follow the design used in all two-stroke and four-stroke models from Husqvarna, with mold graphics integrated straight into the plastic. A lot of racing organizations allow 125cc bikes and 144cc bikes to go up against each other to keep smaller displacement two-stroke models competitive with their four-stroke versions. The 2008 Husqvarna CR is designed to take full advantage of this and deliver a potent power plant with superb suspension components. All of its technical modifications make the CR 150 a great MX contender.

New For 2008
  • Not available

2008 Husqvarna CR Specs

  • Model: Husqvarna CR 150
  • Engine Type: 144-cc, single-cylinder
  • Bore and Stroke: 2.28 inches and 2.14 inches
  • Compression ratio: 8.81:1
  • Valve Train: Reed valve
  • Induction: Liquid
  • Ignition: Kick
  • Transmission: Manual
  • Final Drive: Chain
  • Fuel Capacity: 1.9 gallons
  • Estimated Fuel Economy: N/A
  • Brakes (Front): 10.2-inch Brembo hydraulic disc
  • Brakes (Rear): 9.5-inch Brembo hydraulic disc
  • Suspension (Front): 1.9-inch Marzocchi inverted form adjustable for rebound damping
  • Suspension (Rear): Sachs aluminum twin-sided swing arm adjustable for rebound damping and shock/spring preload
  • Wheelbase: 57.5 inches
  • Rake: 26 degrees
  • Trail: 4.5 inches
  • Seat Height: 38.8 inches
  • Curb Weight: 92 pounds
  • Tires (Front): Pirelli 80/100 R21
  • Tires (Rear): Pirelli 100/90 R19

Accessories

  • G2 Ergonomics, Corp. Throttle
  • Fastway F3 Footpegs
  • All balls fork seal and wiper Kit and seal kit

Key Competitors For The 2008 Husqvarna CR

  • Honda CRF 150R
  • Cobra CX65
  • Cobra CX50 Senior
Motorcyclist
  • Motorcyclist Online